Antifouling  
OceanMaster HARD RACING Quick Reference Guide
Hard Racing Antifouling is a heavy-duty contact-leaching antifouling based on high levels of copper and organic toxins offering protection against all forms of marine growth. With proper surface preparation and correct application, OceanMaster Hard Racing antifouling offers long terms protection even in the most severe conditions.

For Use On: All types of crafts including high speed power boats and yachts where multi-season effective fouling protection is required. Recommended for use on primed GRP, steel, timber and ferro cement hull.


Application Method: Product designed for applications by spray, roller or brush.
Wet Film Thickness: 160 microns
Dry Film Thickness: 100 microns
Coverage: 6 sq.m/L
Mixing Ratio : Single Component
Thinner : T100
Touch Dry : 1 hrs @ 30° C
Number Of Coats Required : 2 - 3
Recoat : 4 hrs minimum, maximum not critical (Best within 48 hrs)
Launch : 8 hrs minimum, maximum not critical (Best within 14 days, if exceed 14 days lightly wet sand antifouling surface before launching)
Finish : Matt Red, Blue, Green and Black
Available Pack Size : 1 Litre, 4 Litre, 20 Litre

OceanMaster HARD RACING XTREME Quick Reference Guide
A hard matrix antifouling containing special additives offering a super smooth friction free surface. Designed for crafts with speed of 35 knots or more. Offers bright permanent colours.

For Use On: All high speed crafts and vessels that are very frequently used or constantly on the move.



Application Method: Product designed for applications by spray, roller or brush.
Wet Film Thickness: 120 microns
Dry Film Thickness: 60 microns
Coverage: 9 sq.m/L
Mixing Ratio : Single Component
Thinner : T100
Touch Dry : 30mins @ 30° C
Number Of Coats Required : 2
Recoat : 1-2 hrs minimum, max not critical but best within one week
Launch : 4-6 hrs minimum, max not critical but best within 6 months
Finish : Black, Blue, White
Available Pack Size : 4 Litre, 20 Litre

OceanMaster CO-POLYMER PRO Quick Reference Guide
A high performance premium quality antifouling containing a special ablative polymer which reduces friction, eliminates sanding and accumulation of spend antifouling. Suitable for use on aluminium crafts when used as part of a full OceanMaster anti-corrosive primer system.



Application Method: Product designed for applications by spray, roller or brush.
Wet Film Thickness: 170 microns
Dry Film Thickness: 75 microns
Coverage: 9 sq.m/L
Mixing Ratio : Single Component
Thinner : T100
Touch Dry : 30mins @ 30° C
Number Of Coats Required : 2-3
Recoat : 1-2 hrs minimum, max not critical but best within one week
Launch : 4-6 hrs minimum, max not critical but best within 6 months
Finish : Black, Blue, White
Available Pack Size : 4 Litre, 20 Litre
OceanMaster KRUISER Quick Reference Guide
Kruiser antifouling contains a high proportion of cuprous oxides in a controlled dissolution binder. It offers a reasonable good resistance to general fouling, barnacles and other marine growth. Quality self-polishing antifouling containing a special ablative polymer which reduces friction, eliminates sanding and accumulation of spent antifouling.

For use on: New building or refurbishment of marine vessels. Recommended for use on primed GRP, steel, timber hull with a maximum cruising speed of not more than 18 knots.


Application Method: Product designed for applications by spray, roller or brush.
Wet Film Thickness: 110 microns
Dry Film Thickness: 50 microns
Coverage: 5 sq.m/L
Mixing Ratio : Single Component
Thinner : T100
Touch Dry : 1hrs @ 30° C
Number Of Coats Required : 2-3
Recoat : 42 hrs minimum, max not critical but best within 48 hrs
Launch : 8 hrs minimum, 72 hrs maximum
Finish : Matt Red
Available Pack Size : 5 Litre, 20 Litre
OceanMaster KRUISER 3 Quick Reference Guide
Kruiser 3 ablative antifouling provides long-life protection for vessels operating under severe fouling conditions. Developed for use on pleasure craft, seagoing vessels, work boats and barges. Unique self-polishing mechanism prevents attachment of fouling organism helps reduce drag resistance, eliminates sanding and accumulation of spent antifouling.

For Use On: All types of craft where multi-season effective fouling protection is required. Long-life fouling protection reduces operating costs and extend dry docking intervals of up to 3 years.


Application Method: Product designed for applications by spray, roller or brush.
Wet Film Thickness: 200 microns
Dry Film Thickness: 110 microns
Coverage: 5 sq.m/L
Mixing Ratio : Single Component
Thinner : T100
Touch Dry : 1 hrs @ 30° C
Number Of Coats Required : 2-3
Recoat : 4 hrs minimum, max not critical but best within 48 hrs
Launch : 8 hrs minimum, 72 hrs maximum
Finish : Matt Red, Blue and Black
Available Pack Size : 5 Litre, 20 Litre