Resins  
Two Component  
OceanMaster EVERSHIELD EPOXY SHEATHING RESIN Quick Reference Guide
Two-pack epoxy resin used in conjunction with OceanMaster Sheathing Fabric. The system provides a completely joint-free impermeable moisture barrier, minimising water ingress in wooden hulls and decks. Suitable for laminating of fibreglass reinforcement materials.

For Use On : Timber hulls and decks. Protects underwater hull from marine organism entering from the outside.
Application Method : Product designed for applications by roller or brush.
Wet Film Thickness : 85 microns
Dry Film Thickness : 40 microns
Coverage : 6-10 sq. m/L (Depending on type of timber and fabric used)
Mixing Ratio : 2 to 1 by volume
Thinner : N/A (Cleaning Fluid: Thinner T500)
Pot Life 500gm : 15 mins @ 30° C (Using a large flat tray for the mixture will greatly extend the working time)
Touch Dry : 2 hrs @ 30° C
Number Of Coats Required : 2
Recoat (Same Product) : 4 hrs minimum, 8 hrs maximum. (If maximum time exceed, allow overnight curing, sand surface)
Recoat (Other Products) : Allow overnight curing, sand surface
Finish : Clear
Available Pack Size : 1.5 Litre, 6 Litre Set

OceanMaster EPOSHIELD EPOXY BARRIER COAT Quick Reference Guide
A two component fast cure, high performance coating for protection against osmosis on sound GRP Gelcoat. Provides a water impervious barrier coat suitable for both above and below waterline applications.

For Use On : GRP surface for prevention of osmosis.



Application Method : Product designed for application by spray, roller or brush.
Wet Film Thickness : 100 microns
Dry Film Thickness : 50 microns
Coverage : 9 sq.m/L
Mixing Ratio : 3 to 1 by volume
Thinner : T500
Touch Dry : 1 hrs @ 30° C
Number Of Coats Required : 4-6
Recoat : 4 hrs minimum, 24 hrs maximum
Aged Recoat : Sand surface
Finish : Matt Light Blue, White
Available Pack Size : 4 Litre Set

OceanMaster EPOGUARD EPOXY ANTI-OSMOSIS COATING Quick Reference Guide
Two-pack solvent free epoxy for treatment and protection against osmosis on GRP. Developed with the flexibility of mixing with various extenders to produce a variety of adhesives and fillers. Aluminium, graphite powder, copper compound can be blended for additional features or physical properties when used as a coating.

For Use On : GRP surface for treatment or prevention of osmosis. A range of extenders maybe incorporated for its intended features.

Application Method : Product designed for application by roller or brush.
Wet Film Thickness : 100 microns
Dry Film Thickness : 100 microns
Coverage : 6 sq.m/L
Mixing Ratio : 3 to 1 by volume
Thinner : N/A (Cleaning Fluid T500)
Pot Life 100gm : 30 mins @ 30° C
Touch Dry : 4 hrs @ 30° C
Number Of Coats Required : 3
Recoat : 2 hrs minimum if applied wet on tack free, 24 hrs maximum
Aged Recoat : Sand surface
Finish : Clear
Available Pack Size : 2 Litre Set
Glues  
Two Component  
OceanMaster EVERGLUE EPOXY RESIN GLUE Quick Reference Guide
A non-shrinking, high strength gap filling two pack epoxy resin glue. It can be used for bonding a wide range of materials and provides a strong waterproof joint.

For Use On : All marine and industrial applications where a high performance epoxy resin-based adhesive is required. Offers non- staining glue line when cured.


Application Method: Product designed for applications by spatula, putty knife or notched spreader.
Coverage: Approximately 2-3 sq. m
per 1 litre depending on porosity
and surface roughness
Mixing Ratio : 2 to 1 by volume
Thinner : N/A (Cleaning Fluid: Thinner T500)
Pot Life 100gm : 25 mins @ 30° C
Cramping Time : 24 hrs
Full cure : 7 days
Sandable : 10 hrs
Colour : Light Amber
Available Pack Size : 500gm, 1.00kg, 6.3kg
OceanMaster RESORCINOL RESIN MARINE GLUE Quick Reference Guide
OceanMaster Resorcinol glue is a high strength, waterproof exterior grade synthetic resin glue. It is recommended for all species of untreated woods and woods treated with certain fire retardants or preservatives. OceanMaster Resorcinol glue has a slight gap filling properties and is suitable for timber lamination and jointing in boats and for other structural woodwork.

For Use On : Structural bonding of timber items subjected to exterior weather and marine applications.

Application Method : Stir thoroughly until a smooth consistent paste. Apply to both sides to be glued. Heavier spreads are required for rough surfaces, low-density timber and where long assembly periods are required.
Coverage : Approximately 200-250 ml per sq m
Mixing Ratio :
By volume: 2 parts resin to 1 part powder
By weight: 5 parts resin to 1 part powder
Pot Life 100gm : 90 mins @ 30° C
Cramping Pressure :
Low density wood 120 psi
High density wood 200 psi
Clamping Time :
Low density wood 2 hrs @ 30° C
High density wood 3 hrs @ 30° C
Available Pack Size : 600gm, 1.2kg, 2.4kg set
Fillers  
Two Component  
OceanMaster EVERFILL EPOXY RESIN FILLER Quick Reference Guide
High performance epoxy resin filler for general repair and fairing jobs. Excellent sanding and non- sagging properties.

For Use On : All marine and industrial applications for filling, repair and fairing work. Forms a strong, permanent water proof filler that is easy to sand and will bond to a variety of substrates.


Application Method : Product designed for application by spatula, putty knife or trowel.
Coverage : 1 Litre of mixed filler applied to a thickness of 1mm will cover approximately 1 sq m
Mixing Ratio : 2 to 1 by volume
Thinner : N/A (Cleaning fluid: Thinner T500)
Pot Life 100gm : 20 mins @ 30° C
Touch Dry : 1 hrs @ 30° C
Full Cure : 5 days
Sandable : 6 hrs (hand sanding 4 hrs)
Finish : Light Brown
Available Pack Size : 875gm, 1.75kg, 7kg set
OceanMaster EPOMAST EPOXY FAIRING COMPOUND Quick Reference Guide
A low density, solvent-free epoxy fairing filler for marine and industrial applications. Designed with good hold-up on vertical surfaces, and it will bond well to a variety of substrates including fibreglass and timber, and metal surfaces with suitable preparation. Cure to a lightweight, easily sandable material that can be used for cosmetic or surface applications like shaping, filling and fairing.

For Use On : Filling and fairing work on large surface areas to smoothen and remove imperfections.


Application Method : Product designed for application by spatula, putty knife or trowel.
Coverage : 1 Litre of mixed filler applied to a thickness of 1mm will cover approximately 1 sq m
Mixing Ratio : 1 to 1 by volume
Thinner : N/A (Cleaning fluid: Thinner T500)
Pot Life 500ml : 20-30 mins @ 30° C
Touch Dry : 1 hrs @ 30° C
Full Cure : 4 days
Sandable : 2 hrs
Finish : Light Blue
Available Pack Size : 8 Litre Set