Primers & Sealers
 
Single Component  
OceanMaster MARINECOAT MULTIPURPOSE VINYL PRIMER Quick Reference Guide
A single-pack non tar quick drying multipurpose vinyl primer. Provides excellent adhesion and anti-corrosive protection. Ideal as an anti-corrosive system prior to application of antifouling.

For Use On: Above and below water on suitably prepared steel, wood and fibreglass substrates.

Application Method : Product designed for application by spray, roller or brush.
Wet Film Thickness : 130 microns
Dry Film Thickness : 80 microns
Coverage : 5 sq.m/L
Mixing Ratio : Single Component
Thinner : T100
Touch Dry : 15 minutes @ 30° C
Number Of Coats Required : 2-3
Recoat : 2 hrs minimum, 24 hrs maximum
Aged Recoat : Sand surface
Finish : Grey
Available Pack Size : 1 Litre, 5 Litre

Two Component  
OceanMaster UNIVERSAL PRIMER Quick Reference Guide
Two-pack epoxy primer designed as an anticorrosive coating to provide excellent adhesion and water resistance prior to the application of heavy duty epoxy coatings such as OceanMaster Everguard Epoxy Undercoat.

For Use On : Steel and non-ferrous metals such as zinc, copper, bronze and aluminium.


Application Method : Product designed for application by spray, roller or brush.
Wet Film Thickness : 85 microns
Dry Film Thickness : 40 microns
Coverage : 9 sq.m/L
Mixing Ratio : 3 to 1 by volume
Thinner : T500
Touch Dry : 1 hrs @ 30° C
Number Of Coats Required : 2
Recoat : 4 hrs minimum, 24 hrs maximum
Aged Recoat : Sand surface
Finish : Grey
Available Pack Size : 1 Litre, 4 Litre Set

OceanMaster EVERSEAL EPOXY TIMBER PRESERVATIVE Quick Reference Guide
Two-pack epoxy timber primer and sealer where the ultimate protection of bare timber is required. Low viscosity, high solids, coupled with preservative biocide ensures good penetration into wood to prevent dry rot.

For Use On : All bare timber surfaces. Suitable as a clear undercoat prior to the application of any OceanMaster Varnish System.

Application Method : Product designed for application by roller or brush.
First coat - add 50% thinner to saturate timber. Second coat - add 25% thinner to saturate timber. Third and subsequent coats - no thinner required. Can be applied wet on tacky.
Coverage : 10-16 sq.m/L
Mixing Ratio : 1 to 1 by volume
Thinner : T500
Touch Dry : 1 hrs @ 30° C
Number Of Coats Required : 2-5
Recoat : Can be applied wet on tacky,
24 hrs maximum
Aged Recoat : Sand surface
Finish : Clear
Available Pack Size : 500ml, 2 Litre,
8 Litre Set