Varnishes
SINGLE COMPONENT
OceanMaster CLIPPER PLUS VARNISH Quick Reference Guide

Premium quality one pack gloss varnish with high level of UV absorber. Recommended for exterior or interior use in all marine applications.

For Use On : Bare wood and upgrading of existing varnish.

Application Method : Product designed for application by spray, roller or brush.
Wet Film Thickness : 90 microns
Dry Film Thickness : 40 microns
Coverage : 10-11 sq.m/L
Mixing Ratio : Single Component
Thinner : T100 or T600
Touch Dry : 4hrs @ 30° C
Number Of Coats Required : 4-5
Recoat : 8 hrs minimum, 24 hrs maximum
Aged Recoat : Sand surface
Finish : Clear Gloss
Available Pack Size : 1 Litre, 4 Litre
OceanMaster CLIPPER PLUS SATIN VARNISH Quick Reference Guide


A single-pack modified alkyd polymer resin varnish designed for application to the interior finishing of marine craft. It is tougher than traditional marine varnishes.

For Use On : Bare wood and upgrading of existing varnish. On bare wood, it is recommended to build up coats with OceanMaster Clipper Plus Gloss, then finish with one coat of satin for best results.

Application Method : Product designed for application by spray or brush.
Wet Film Thickness : 120 microns
Dry Film Thickness : 40 microns
Coverage : 10-11 sq.m/L
Mixing Ratio :Single Component
Thinner : T100 or T600
Touch Dry : 4 hrs @ 30° C
Number Of Coats Required : 1-2
Recoat : 8 hrs minimum, 24 hrs maximum
Aged Recoat : Sand surface
Finish : Satin
Available Pack Size : 1 Litre, 4 Litre Set
OceanMaster TIMBERGUARD Quick Reference Guide



Premium quality exterior finish designed to provide long-lasting protection on timber surfaces. TimberGuard provides an enhancing UV shield that also repels moisture, prevents warping, swelling and oxidization / greying of timber.

For Use On : Ideal for exterior wood substrates such as deck, stairs, fences, doors, furniture and other fixtures where damp conditions and/or direct sunlight could promote decay, discolouration and other biological breakdown.

Application Method : Product designed for application by brush, roller or spray.
Wet Film Thickness : 50 microns
Dry Film Thickness : 30 microns
Coverage : 11-12 sq.m/L
Mixing Ratio : Single Component
Thinner : T100 or T600
Touch Dry : 4 hrs @ 25° C
Number Of Coats Required : 1-2
Recoat : 4 hrs minimum, 48 hrs maximum
Aged Recoat : Sand surface
Finish : Tinted Satin
Available Pack Size : 1 Litre
OceanMaster POLYGLOSS POLYURETHANE CLEAR GLOSS Quick Reference Guide
Excellent spray characteristics combined with fast film dry. It has excellent resistance to scratches and water chemicals. Suitable for direct application to all new exotic timbers or over an epoxy two component timber preservative.

For Use On : Developed for interior and shaded exterior use, it can be fully cut and polished when used as a clear finishing system on table tops and bar counters.

Application Method : Product designed for application by spray or brush.
Wet Film Thickness : 85 microns
Dry Film Thickness : 40 microns
Coverage : 12 sq.m/L
Mixing Ratio : 3 to 1 by volume
Thinner : T300
Touch Dry : 4 hrs @ 30° C
Number Of Coats Required : 2-4
Recoat : 6 hrs minimum, 24 hrs maximum
Aged Recoat : Sand surface
Finish : Clear Gloss
Available Pack Size : 1 Litre, 4 Litre Set